Обогреватели для применения в условиях окружающей среды
Ruffneck ™ компании Thermon известна своими прочными, надежными и универсальными сверхпрочными взрывозащищенными обогревателями, системами отопления и отопительными принадлежностями. Norseman ™ компании Thermon – это самая технологически совершенная линия взрывозащищенных электрических воздухонагревателей и отопительных принадлежностей, в том числе воздухонагревателей с принудительной конвекцией и воздухонагревателей с естественной конвекцией, а также нагревательных агрегатов, панельных обогревателей и термостатов.
| primary linear cutout, 160°F (71°C), 277/600 VAC, 25/10 AMP non-inductive |
| secondary linear cutout, manual reset complete with backup magnetic contactor on units under 300V, 30 kW and less, 225°F (107°C), 277/600 VAC, 25/10 AMP non-inductive |
| a wide range of optional auxiliary duct heater controls available either as factory installed on the duct heater or as an EEMAC rated control panel for wall mount, including bulb holders, silent contactors, SCR controllers, switches, magnetic contactors and more |
| models range from 1-120kW and up to 600V, 3 phase |
| frame fabricated from 16-gauge satin-coat steel |
| approved for horizontal duct installation where maximum inlet air temperature does not exceed 25°C (77°F) and maximum rating does not exceed 120 kW |
| CSA C/US & CE approved; GOST approved for global markets |
The Ruffneck™ RDFF Commercial Flanged Duct Heater with finned tubular (Calrod® type*) elements is designed for use in comfort heating applications, such as make-up air heating ...
Смотреть продукт| primary linear cutout, 160°F (71°C), 277/600 VAC, 25/10 AMP non-inductive |
| secondary linear cutout, manual reset complete with backup magnetic contactor on units under 300V, 30 kW and less, 225°F (107°C), 277/600 VAC, 25/10 AMP non-inductive |
| a wide range of optional auxiliary duct heater controls available either as factory installed on the duct heater or as an EEMAC rated control panel for wall mount, including bulb holders, silent contactors, SCR controllers, switches, magnetic contactors and more |
| available for supply voltages up to 600 V, 3 phase |
| frame fabricated from 16-gauge satin-coat steel |
| CSA C/US & CE approved; GOST approved for global markets |
The Ruffneck™ RDFT Commercial Flanged Duct Heater with non-finned tubular (Calrod® type*) elements is designed for use in comfort heating applications, such as make-up air heating ...
Смотреть продукт| primary linear cutout, 160°F (71°C), 277/600 VAC, 25/10 AMP non-inductive |
| secondary linear cutout, manual reset complete with backup magnetic contactor on units under 300V, 30 kW and less, 225°F (107°C), 277/600 VAC, 25/10 AMP non-inductive |
| a wide range of optional auxiliary duct heater controls available either as factory installed on the duct heater or as an EEMAC rated control panel for wall mount, including bulb holders, silent contactors, SCR controllers, switches, magnetic contactors and more |
| model range from 1-120kW and up to 600V, 3 phase |
| frame fabricated from 16-gauge satin-coat steel |
| approved for horizontal duct installation where maximum inlet air temperature does not exceed 25°C (77°F) and maximum rating does not exceed 120 kW |
| CSA C/US & CE approved; GOST approved for global markets |
The Ruffneck™ RDIF Commercial Insert Duct Heater with finned tubular (Calrod® type*) elements is designed for use in comfort heating applications, such as make-up air heating ...
Смотреть продукт| primary linear cutout, 160°F (71°C), 277/600 VAC, 25/10 AMP non-inductive |
| secondary linear cutout, manual reset complete with backup magnetic contactor on units under 300V, 30 kW and less, 225°F (107°C), 277/600 VAC, 25/10 AMP non-inductive |
| a wide range of optional auxiliary duct heater controls available either as factory installed on the duct heater or as an EEMAC rated control panel for wall mount, including bulb holders, silent contactors, SCR controllers, switches, magnetic contactors and more |
| available for supply voltages up to 600 V, 3 phase |
| frame fabricated from 16-gauge satin-coat steel |
| CSA C/US & CE approved; GOST approved for global markets |
The Ruffneck™ RDIT Commercial Insert Duct Heater with non-finned tubular (Calrod® type*) elements is designed for use in comfort heating applications ...
Смотреть продукт| models range from 2-40kW and 208-600V |
| phosphate coated, epoxy painted 18-gauge steel cabinet |
| field convertible from 1 to 3 phase |
| tubular (Calrod® type)* heating elements |
| individually adjustable air flow louvres |
| permanently lubricated motors |
| overheat protection |
| ceiling mounting bracket supplied |
| motors mounted outside element bundle |
| numerous optional factory installed features to meet specific customer requirements, including optional thermostats and controls, and optional wall bracket |
| numerous accessories for field installation available |
| CSA C/US approved for horizontal air flow; CE approved; |
The Ruffneck™ RGE Regular Duty Unit Heater is designed for use in regular duty industrial and commercial space heating applications.
Смотреть продукт| models range from 15-50kW and 208-600V |
| 40 and 50 kW units incorporate split loads (50%) for remotely controlled energy management systems |
| factory-installed transformers, contactors and thermostats where specified |
| individually adjustable air flow louvres |
| factory-balanced aluminum fan blade |
| NEMA 12 standard, full-sized control panel with hinged removable door |
| epoxy coated 14-gauge steel cabinet for superior corrosion-resistance; optional stainless steel available |
| fan delay in «ON» and «OFF» cycles |
| «Fan Only» terminals for connection to remote switch |
| ceiling mounting bracket supplied |
| motor mounted outside the element bundle eliminates premature failure due to overheating and provides easy access for motor maintenance |
| robust finned tubular sheathed elements with epoxy sealed terminals eliminate contamination from moisture and airborne impurities |
| numerous optional factory installed features to meet specific customer requirements; numerous accessories for field installation available |
| CSA C/US approved for horizontal and vertical air flow; CE approved; |
The Ruffneck™ RGX Heavy Duty Unit Heater is specifically engineered for heavy duty use in industrial environments, such as mine shafts, pulp & paper mills ...
Смотреть продукт| 3 standard sizes range from 2,5-50kW and 208-600V; single or double banked heating modules available |
| painted steel duct with mounting holes for attachment to the duct section; approved for mounting in horizontal duct section |
| patented x-Max® terminal housing for easy access to wiring terminal connection |
| differential pressure switch |
| factory-installed high limit sensing thermocouples |
| optional features include transition sections, stainless steel duct section, mechanical temperature control, special temperature code, outlet air thermostat and outlet air thermocouple |
| available with T2D, T3A or T3B hazardous area temperature codes |
| CSA C/US approved |
The Ruffneck™ RXDF Explosion-Proof Duct Heater is designed for heating air or gases in hazardous environments where potentially explosive substances are present ...
Смотреть продукт